E-NOX CLEAN

Aqueous, acidic cleaning gel for removing limescale and rust from metal surfaces. The gel formulation makes it suitable for use on vertical surfaces.

Brightens stainless steel, aluminum and non-ferrous metals without attacking the base metal
Water-based gel, acidic
Does not contain hydrofluoric, nitric or hydrochloric acid
VOC reduced
Removes limescale and cement residue, extraneous rust and light grease and oil contamination
Can be diluted with water up to 1:40
Removes rust film from stainless steel
Non-flammable

Highly effective, ready-to-use cleaning gel (can be diluted with water up to 1:40, but the gel-like, viscous consistency of the cleaner decreases with the addition of water) for removing mineral deposits such as limescale and cement residue, extraneous rust and light grease and oil soiling from metal surfaces.

E-NOX CLEAN brightens stainless steel, aluminum and non-ferrous metals without attacking the base metal. It is not corrosive to iron, V2A steel, non-ferrous metals and aluminum and does not dissolve gypsum and silicate deposits.

The cleaning gel adheres very well to vertical surfaces, sieves, rollers, etc. This allows the active ingredients to develop optimally and the dirt is loosened and removed without scratching, scrubbing or scouring.

After rinsing with water, the cleaner can be removed without leaving any residue.

According to the Food and Feed Code, the cleaner may be used in food processing plants. It helps to meet the high requirements of the Solvent Ordinance (DE: 31.BImSchV, AT: VOC-Anlagen-Verordnung - VAV): the limit values do not apply to cleaners with a solvent content of less than 20%.

Watery, acidic cleaning gel

Removes limescale and cement residue, extraneous rust and light grease and oil contamination

Can be diluted with water up to 1:40

Brightens stainless steel, aluminum and non-ferrous metals without attacking the base metal

Removes rust film from stainless steel

Does not contain hydrofluoric, nitric or hydrochloric acid

Water-based - non-flammable

Technical specification

Labelling:	Marked
VOC content:	VOC reduced
NSF certified:	no
Pollution:	Limescale, mineral deposits, rust, oxidation, tarnishing
Material:	Aluminum, stainless steel, tiles, plastic, steel
Check material compatibility:	Non-ferrous metals, rubber, wood, painted surfaces
Cleaner base:	watery-sour
Mechanics:	hand cleaning
manual/automatic:	manually
Concentrate:	ready to use, miscible with water
Seal of approval:	Mixable with water, Ready-To-Use, VOC reduced!
Safety Advice:	Eye Dam. 1, Met.Corr. 1, skin irritation. 2

Can be used universally in industry and trade:

E.g. B. heating coils, pipes, boilers, steam jets, washing machines and acid-resistant stone floors and wall tiles

E.g. For basic cleaning after the assembly of facade parts, doors, portals, window frames, shop window profiles, etc. made of stainless steel, to thoroughly remove harmful building dirt

E.g. In the maintenance of stainless steel surfaces, especially in environments where concentrations of chlorides and sulfur dioxide can occur (e.g. near the coast)

Expert tip for bikers: Clean stainless steel exhaust systems, rims and spokes effortlessly and quickly. Brush on, gently work in with a brush, leave for approx. 10 minutes, rinse off, done!