GreeNox-N Neutraliser

Effective neutralization after weld cleaning!

GREENOX-N is specifically designed for neutralizing surfaces after electrochemical and electropolishing processes. Electrolyte solutions are based on mineral acids, which continue to interact with the stainless steel surface if not completely neutralized. Rinsing with water alone only dilutes the acid and is insufficient for neutralization.

All the advantages of GREENOX-N:

• Complete neutralization: Stops the effect of acid on the stainless steel surface after electrochemical processes.

• Ready to use: No mixing required, ready to use immediately.

• Safe: Non-flammable, non-toxic, non-corrosive and label-free according to CLP Regulation.

• Residue-free: Leaves no residue, ensures a clean and safe surface.

Application

After cleaning the weld seams, the excess electrolyte solution is first removed with a cleaning cloth or paper towel. Then, GREENOX-N is sprayed onto the surface and thoroughly wiped off with a clean cloth. These steps ensure that no salt residue remains on the stainless steel surface.

• Neutralises GREENOX-H and GREENOX-T solutions. Apply to the treated surfaces after cleaning the weld seams.

   

The device uses the highly flexible MICRO carbon fiber brush, which is ideal for tight spaces, railings, and hard-to-reach inside corners. For larger areas, outside corners, or fillet welds, special electrodes and pads can be used to ensure thorough cleaning.